Tohatsu MFS30DETS 30HP Outboard – 15in Shaft

Small performance hulls achieve sports-car handling instantly once the Tohatsu MFS30DETS applies its 500cc displacement to the water. The inline-three EFI block translates forward helm inputs into brutal low-end torque, pushing low-profile fiberglass runabouts safely across wide bays. Verifying your exact transom geometry validates this 15 inch short shaft power tilt outboard fits correctly without causing massive water pump starvation.

Eliminate the risk of catastrophic propeller strikes on shallow tidal flats by leveraging the factory hydraulic power trim and tilt system. You elevate the 62 kg gearcase completely out of the water directly from your console switch. Engineers cast the midsection using impact-deflecting marine aluminum. This thick-wall metal prevents catastrophic structural fatigue when repowering small fiberglass skiffs for shallow water operation.

Key Features of Tohatsu MFS30DETS

- 15-Inch Short Shaft: Matches standard low transoms exactly, preventing excessive drag from a deep gearcase and increasing top-end speeds drastically.
- Hydraulic Power Trim: Lifts the gearcase completely clear of mud flats at the push of a button, preventing catastrophic propeller strikes in shallows.
- Remote Mechanical Control: Connects your steering wheel directly to the engine pivot tube, sharpening handling response in narrow, twisting creeks.
- Battery-Less EFI System: Vaporizes gas instantly into the cylinders regardless of temperature, guaranteeing crisp throttle translation on lightweight fiberglass hulls.
- Turn-Key Electric Start: Engages the flywheel instantly via 12-volt battery power, eliminating physical pull strain completely during freezing early morning launches.
- 17-Amp Alternator Output: Keeps your cranking battery topped off automatically, powering demanding fish finders and livewell pumps reliably all day.
- 500cc Displacement Block: Produces massive low-end torque internally, lifting heavily loaded 13-foot fiberglass runabouts onto plane much faster.
- 2.17:1 Gearcase Ratio: Multiplies engine torque effectively, translating the 500cc displacement into relentless pushing force for loaded hunting skiffs.
- Impact-Deflecting Geometries: Reinforces the lower unit housing tightly, protecting internal gears against hidden submerged log strikes in shallow water.
- Four-Stroke Engineering: Burns fuel highly efficiently without oil mixing, easily meeting strict local waterway emissions regulations and EPA standards.

Why Choose Tohatsu MFS30DETS

This exact model demands a 15-inch transom height paired with a complete forward helm station. Attaching it to a 20-inch transom leaves the cooling intakes completely dry. Tiller conversion requires extensive factory retrofits. Finding a low transom remote outboard fits specific classic sport hulls perfectly.

- Confirm your transom measures exactly 15 inches vertically down the centerline.
- Route mechanical steering and shift cables cleanly avoiding sharp pinch points.
- Operate legally on restricted waters using certified low-emission combustion processes.

Ideal Application and Vessel Fitment

This 15-inch short shaft model thrives on low-profile fiberglass micro-skiffs, classic aluminum bass trackers, and lightweight sport boats equipped with forward or center consoles. Because the shaft length perfectly matches standard transoms, the gearcase generates minimal hydrodynamic drag, maximizing top-end speed on ultra-light hulls. By utilizing the factory power trim, operators navigating a shallow water remote steer outboard can quickly lift the propeller over oyster bars and submerged grass beds without ever leaving the steering wheel.

Warranty, Support and Maintenance

Authorized recreational operation receives a 5-Year Limited Warranty alongside exceptional factory support. Registered commercial applications fall under a strict 1-Year Limited Warranty with zero corrosion coverage applied to the block. Scheduled maintenance requires replacing gearcase lubricants and changing oil filters at manual-specified intervals. Always save all physical service records. Your engine serial number acts as the only way to source exact genuine replacement parts. Mulmotor provides pre-purchase product guidance and order-related customer support.