Skip to content

Free worldwide shipping — already included in every price

SukaBoat.com
Honda BF60AK1LRTC 60HP – Four Stroke 20-Inch Remote

Honda BF60AK1LRTC 60HP Outboard – 20in Shaft, Remote Mechanical, Power Tilt

Honda BF60AK1LRTC handles the load at 60 horsepower. Rigging includes a 20-inch shaft and remote mechanical steering. Built to Canada emission standards. A fit for mid-size aluminum and fiberglass boats. - Built to Canada emission spec - 60 horsepower on tap - Fits 20-inch transom height - Remote m

  • Free worldwide shipping — already in the price
  • Secure checkout with card or PayPal

5219.00 USD

In stock

SKU:
BF60AK1LRTC

5219.00 USD

In stock

Place Honda BF60AK1LRTC on a compatible fiberglass runabout, small pontoon, or aluminum bass boat when remote steering and 60 HP are required with a 20-inch shaft. Its 998 cc inline three-cylinder SOHC 4-stroke engine uses 12 valves and produces 60 HP at 5,500 RPM. Honda BF60AK1LRTC is a remote-control outboard with Programmed Fuel Injection, electric starting, Power Trim and Tilt, BLAST, Lean Burn Control, and NMEA 2000 compatibility. The long shaft suits compatible standard transoms.

At approximately 243 lbs dry, the engine should be included in transom, battery, trailer, and total boat-balance calculations. Its 5,000–6,000 RPM full-throttle range provides a reference for propeller selection, while the 2.07:1 gear ratio supports forward, neutral, and reverse operation. The 22-amp alternator supplies 17 net charging amps for supported navigation displays, pumps, lighting, and accessories. Confirm the boat’s horsepower rating, transom height, steering hardware, battery requirements, and propeller setup before installation.

Key Features of Honda BF60AK1LRTC

- Fit the 20-inch long shaft to compatible fiberglass boats, small pontoons, and aluminum bass boats.
- Remote Steering — keeps throttle and directional control available from the boat’s helm.
- 998 cc inline three-cylinder SOHC engine produces 60 HP at 5,500 RPM.
- 243 lbs dry weight requires suitable transom capacity and careful boat-balance planning.
- Programmed Fuel Injection with BLAST manages fuel delivery and listed low-speed acceleration response.
- Power Trim and Tilt adjusts engine position during acceleration, cruising, docking, and trailering.
- Lean Burn Control and NMEA 2000 compatibility provide specified operating and connectivity functions.
- 22 amps total with 17 charging amps support compatible marine electronics.

Why Choose the Honda BF60AK1LRTC

This configuration suits boaters who want a remote helm, a 20-inch shaft, and more output than smaller midrange motors. Fuel injection, Power Trim and Tilt, and NMEA 2000 compatibility add useful equipment for a properly rigged recreational boat.

- Remote steering suits dedicated helm layouts
- 60 HP supports approved recreational hulls
- 17 charging amps support onboard electronics

Applications & Use Cases

Honda BF60AK1LRTC is suited to fiberglass runabouts, small pontoons, aluminum bass boats, and similar recreational hulls using compatible 20-inch transoms. It can support fishing, family boating, harbor travel, and short coastal trips when the vessel accepts the engine’s weight and horsepower.

- Fiberglass runabouts with long transoms
- Small pontoons using remote steering
- Aluminum bass boats requiring 60 HP

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the Honda owner’s manual for the 2.6 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system checks, remote controls, NMEA 2000 equipment, and Power Trim and Tilt. Confirm service intervals and dealer support before purchase.

SKUBF60AK1LRTC
CategoryOutboard Motors
ShippingIncluded in the price, worldwide
Ships in 2–5 days, then 15–21 days in transit

Customer reviews

No reviews yet.

Write a review

Sign in or create an account to rate this product and share your experience.

Related products