Place Honda BF250DUCRC on a compatible performance hull when counter-rotation, iST control, and a 20-inch U shaft are required for a specialized installation. Its 3,583 cc, 60-degree V6 engine uses 24 valves and SOHC operation, producing 250 HP. Honda BF250DUCRC is a VTEC 4-stroke outboard with Programmed Fuel Injection, electric starting, Intelligent Shift and Throttle, and Power Trim and Tilt. The supplied application targets high-performance bass boats and sport fishing hulls.

The listed dry weight is 622 lbs and should be verified against the vessel’s transom and combined-engine limits before purchase. Its 5,300–6,300 RPM full-throttle range provides a reference for propeller selection, while the 2.00:1 gear ratio supports standard forward, neutral, and reverse operation. The 90-amp alternator supplies 60 net charging amps for supported fishing electronics and accessories. Confirm the unusual 20-inch U-shaft description against the boat’s mounting requirements and serial-number documentation.

Key Features of Honda BF250DUCRC

- Confirm the 20-inch U shaft against the boat’s specified transom and mounting requirements.
- Counter-Rotation iST — provides the listed control arrangement for compatible twin-engine digital systems.
- 250 HP comes from a 3.6-liter V6 SOHC engine with 24 valves.
- 622 lbs dry weight requires careful transom capacity, balance, and installation planning.
- Programmed Fuel Injection manages fuel delivery within the supplied VTEC 4-stroke platform.
- Intelligent Shift and Throttle provides drive-by-wire control for supported digital helm systems.
- Power Trim and Tilt adjusts engine position during acceleration, cruising, docking, and trailering.
- 90 amps total with 60 net charging amps support compatible marine electronics.

Why Choose the Honda BF250DUCRC

This configuration combines counter-rotation and iST control for a performance boat that requires specialized fitment. The listed U shaft needs direct confirmation, while the 250 HP V6 provides a defined power level for properly rated bass and sport fishing hulls.

- Counter-rotation suits compatible twin configurations
- iST control supports digital helm systems
- 250 HP fits approved performance hulls

Applications & Use Cases

Honda BF250DUCRC is listed for high-performance bass boats, sport fishing hulls, and other compatible boats using the supplied U-shaft configuration. Use it only when the vessel supports the counter-rotation arrangement, digital controls, engine weight, and 250 HP output.

- High-performance bass boats
- Sport fishing hulls with iST
- Performance boats requiring counter-rotation

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for engine oil, gearcase lubricant, filters, spark plugs, cooling-system checks, iST controls, counter-rotation components, and Power Trim and Tilt. Confirm the 7.8 L oil capacity, U-shaft details, service intervals, and dealer support before purchase.