Honda BF20DK3LHC 20HP 4-Stroke Outboard – 20in Shaft, Tiller

Power Honda BF20DK3LHC when an aluminum fishing boat or 14- to 16-foot utility skiff needs a 20-inch shaft and direct tiller control. Its 350 cc inline two-cylinder SOHC 4-stroke engine produces 20 HP at 5,000 RPM and uses a four-valve layout. Honda BF20DK3LHC is a manual-start portable outboard with a tiller handle, single carburetor, six-amp alternator, and five-position manual tilt. The long shaft is intended for boats using a compatible 20-inch transom.

At 108 lbs dry, this configuration remains part of the boat’s transom and transport planning even though it uses manual controls. The 5,000–6,000 RPM full-throttle range helps guide propeller selection, while the 2.08:1 gear ratio supports standard forward, neutral, and reverse operation. Manual tilt provides selectable lower-unit positions for shallow-water approaches, launching, and storage. Confirm the boat’s horsepower limit, transom height, carrying requirements, and propeller fitment before use.

Key Features of Honda BF20DK3LHC

- Mount the 20-inch long shaft on compatible aluminum fishing boats and utility skiffs.
- Manual Tiller — keeps steering, throttle, and shifting control directly at the outboard.
- 350 cc inline two-cylinder SOHC engine produces 20 HP at 5,000 RPM.
- 108 lbs dry weight requires attention to transom capacity and portable handling.
- Single Carburetor — uses an accelerator pump within the supplied fuel-induction system.
- Five-position manual tilt changes lower-unit clearance for selected shallow-water and storage situations.
- 6-amp alternator provides electrical output for supported small-boat accessories.
- 2.08:1 gear ratio supports forward, neutral, and reverse operation through the portable gearcase.

Why Choose the Honda BF20DK3LHC

The manual tiller layout keeps this model straightforward for operators who do not need a remote helm. Its 20-inch shaft fits long-transom boats, while the 20 HP rating gives approved aluminum hulls useful power for fishing and utility work.

- Manual controls simplify the boat setup
- 20-inch shaft suits long transoms
- Five tilt positions support shallow-water use

Applications & Use Cases

Honda BF20DK3LHC is intended for aluminum fishing boats, utility skiffs, and similar 14- to 16-foot hulls using a 20-inch transom. It can support lake fishing, shoreline travel, dock movement, and general utility boating when the vessel is rated for 20 HP.

- 14- to 16-foot aluminum skiffs
- Utility boats with long transoms
- Fishing boats using tiller control

Warranty, Support & Maintenance

Routine ownership should follow the Honda owner’s manual and include engine oil, gearcase lubricant, filters, spark plugs, carburetor service, cooling-system checks, manual tilt, and tiller-control inspection. The supplied information lists a 5-year non-declining standard warranty. Confirm exact fluid quantities, service intervals, registration, and dealer support before purchase.