Severe bow rise often blocks your forward line of sight when accelerating hard, but the FatSac Open Bow Triangle Ballast provides the perfect technical solution to neutralize heavy stern weight. FatSac engineered this specialized low-profile triangular profile bladder to sit flush inside the open-bow floor footwell area without stealing passenger legroom. Pushing 650 lbs of raw water displacement weight into the nose forces the hull to track flat, stretching out your wakesurf wave pocket. The forward leveling keeps wakeboarding launch lines incredibly long and clean. Wave height peaks beautifully.

This commercial marine-grade skin uses proprietary, layered UV-stabilized Valmex polyvinyl fabric that easily withstands heavy foot traffic scuffs and raw fiberglass rubbing. High-frequency welded and seam-taped connections prevent sudden burst fractures, allowing your crew to safely walk or sit directly on the bag during operation. Captains upgrading their integrated plumbing lines cross-reference these inset ports with setups in our boat wakeboard package sets collection to optimize pump speeds. Three valve ports handle rapid water movement.

Key Features of FatSac Open Bow Triangle Ballast

- 650 lbs Added Ballast: Displaces approximately 78 US gallons of water in the nose to counterbalance heavy engine locker weight arrays.
- Valmex Polyvinyl Material: Formulates an extra heavy-duty, walkable fabric shell that stays safe from puncture damage under heavy passenger footsteps.
- Seam-Taped Tech Construction: Uses industrial high-frequency welding and pressure tape to build a burst-proof structure under maximum volume loads.
- Triangular Profile Footprint: Sized at 54 x 54 x 54 x 12 inches to contour perfectly inside traditional open-bow footwell compartments.
- 3 Integrated Valve Ports: Outfits the skin with three smart port locations to deliver versatile, high-velocity fill, drain, and venting options.
- Turnkey Fitting Kit Included: Packs essential high-flow fittings including one W730, one W749, and one W731 connector out of the box.
- Supa Tsunami Pump Ready: Pairs seamlessly with Supa Tsunami portable pumps and inboard automatic plumbing lines for fast lake setups.
- USA Handmade Standards: Fabricates every ballast sac by hand in the USA to guarantee professional marine quality and zero leaks.

Open-Bow Floor Balancing & Front Hull Plane Control

This 650 lbs triangle sac serves as the industry standard for stabilizing lightweight bow sections against massive plug-and-play rear ballast configurations. Pulling the nose deeper flattens your boat’s tracking stance, trimming the hull to generate long, steep wave faces.

Our pro shop crew threw this open-bow triangle bag onto the floor of a standard bow rider to test the forward weight leveling. The three integrated valve ports are an awesome asset, allowing us to bleed out trapped air lines instantly on the platform. Pushing 650 lbs into the footwell completely killed our bow rise, turning a washed-out wave into a crisp surf zone with a massive pocket.

Why Choose FatSac Open Bow Triangle Ballast

Standard square bags slide across bow decks, block seat access, and pop along the corners when the hull hits heavy lake chop, dumping hundreds of gallons inside your stringers. The FatSac Triangle sac avoids this safety hazard by packing low-profile floor stabilization and walkable Valmex layers together, providing a long-term commercial investment.

Factory Warranty & Professional Care Guidelines

FatSac backs this model with an official 1 Year Limited Manufacturer Warranty against factory bonding failures. To protect the high-frequency welded seams and prevent internal mildew rot, always evacuate water completely before long-term winter storage. Keep sharp loose anchors out of the bow footwell area.