Fighting strong tidal currents demands the Tohatsu MFS6DWDSPROL Sail Pro to push heavy displacement hulls efficiently. The 123cc block spins a specialized high-thrust propeller, delivering relentless stopping power and reverse control for sailing vessels. Verifying your auxiliary bracket height guarantees this 6hp high thrust sailboat kicker fits securely without starving the internal water pump during heavy morning chop.

Replenish depleted house batteries continuously while motor-sailing by leveraging the integrated 5-amp charging alternator. You route the factory wiring directly to your battery bank for automatic voltage recovery underway. Tohatsu engineers the water-cooled 26 kg block using multi-stage marine primers beneath the Beluga White finish. This physical barrier blocks cosmetic paint blistering when repowering heavy displacement hulls in harsh saltwater environments.

Key Features of Tohatsu MFS6DWDSPROL

- Carbureted Fuel Induction: Meters gas reliably into the cylinder, providing steady low-RPM operation when navigating no-wake harbor zones.
- 20-Inch Long Shaft: Reaches deep below elevated sailboat auxiliary brackets, keeping the propeller fully engaged during steep coastal swells.
- Six-Position Manual Tilt: Adjusts the running angle physically, allowing the operator to lift the gearcase over shallow coastal reefs safely.
- 360-Degree Tiller Steering: Concentrates shift and throttle inputs directly into your operating hand for immediate reverse thrust without a gearbox.
- 5-Amp Charging Alternator: Outputs 60 watts of constant electrical current underway, powering essential navigation lights and recharging small 12-volt sailboat batteries.
- Beluga White Finish: Reflects intense ultraviolet sunlight physically, preventing cosmetic fading and matching premium fiberglass hull finishes perfectly.
- Through-Prop Exhaust: Channels toxic combustion gases directly underwater, keeping the aft operator station completely free of choking smoke.
- Accessible Oil Drain: Simplifies routine crankcase lubrication changes, saving significant time during seasonal maintenance prep without specialized tools.
- High-Thrust Sail Propeller: Bites into the water aggressively at low speeds, providing massive stopping power and reverse control for heavy vessels.
- Clean Four-Stroke Combustion: Burns unleaded fuel highly efficiently without messy two-stroke oil mixing, keeping pristine anchorages completely free of surface oil slicks.

Why Choose Tohatsu MFS6DWDSPROL

This specific 20-inch Sail Pro block is built strictly to serve as auxiliary sailboat propulsion with battery charging needs. Mounting it on a standard 15-inch dinghy will cause massive lower unit drag. Installing a reliable manual start long shaft outboard ensures safe harbor returns.

- Verify your sailboat motor bracket requires exactly a 20-inch vertical shaft drop.
- Connect the factory charging circuit securely to your onboard 12-volt battery system.
- Avoid toxic exhaust fumes using advanced four-stroke internal lubrication.

Ideal Application and Vessel Fitment

This 20-inch long-shaft Sail Pro configuration is engineered specifically as a primary kicker for small sailboats and auxiliary power for high-transom displacement hulls demanding onboard electrical generation. The extended midsection ensures the specialized high-thrust propeller remains deeply submerged when the vessel pitches in steep ocean swells. By utilizing a 5-amp alternator and 360-degree steering, captains gain total directional control while charging electronics, making this long shaft portable outboard motor an essential tool for maneuvering heavy sailboats.

Warranty, Support and Maintenance

Authorized recreational operation receives a 5-Year Limited Warranty alongside exceptional factory support. Registered commercial applications fall under a strict 1-Year Limited Warranty with zero corrosion coverage applied to the block. Scheduled maintenance requires replacing gearcase lubricants and checking spark plugs at manual-specified intervals. Always save all physical service records. Your engine serial number acts as the only way to source exact genuine replacement parts. Mulmotor provides product-information support before purchase and assistance with order-related questions.