Yamaha F300UCB2 300HP Outboard – 30in Shaft, V6
$15,273
☆☆☆☆☆ (0)
For open water, Tohatsu MFS30DETL runs on 30 horsepower. A 20-inch shaft rounds out the rigging. Well matched to mid-size aluminum and fiberglass boats. The layout favors easy servicing over a season of use. - Rated at 30 horsepower - Shaft length 20 inches - Backed by standard marine warranty - Fi
3179.00 USD
In stock
3179.00 USD
In stock
Blistering acceleration across open bays becomes standard when the 500cc Tohatsu MFS30DETL translates remote throttle inputs into massive forward momentum. The battery-less EFI system meters exact gas ratios into the cylinders, launching heavy fiberglass runabouts through coastal chop without carburetor hesitation. Verifying your exact transom height guarantees this 30hp remote steer power trim outboard mounts safely without causing severe lower unit drag.
Optimize your running attitude dynamically in rough chop by engaging the integrated hydraulic power trim system directly from the forward console. You tuck the 64 kg engine inward to push the bow down fast and slice through heavy offshore swells safely. Tohatsu builds the midsection using impact-deflecting marine aluminum. This thick-wall casting survives submerged log strikes across years of use when repowering premium multi-species boats.
Key Features of Tohatsu MFS30DETL
- Hydraulic Power Trim and Tilt: Adjusts the running angle dynamically via a console switch, optimizing hull attitude instantly during rough water crossings.
- Remote Steering Bracketry: Accepts standard mechanical cables directly from your forward helm, integrating flawlessly for precise directional control.
- 20-Inch Long Shaft: Lowers the propeller below turbulent surface water on high transoms, maximizing forward thrust and preventing severe ventilation.
- Battery-Less EFI System: Meters exact gas ratios into the cylinders, completely eliminating carburetor jet clogging and throttle hesitation across the RPM band.
- 500cc Inline-Three Engine: Breathes clean air efficiently to produce massive low-end torque, lifting heavy fiberglass runabouts onto plane much faster.
- 17-Amp Charging Alternator: Replenishes electrical drain from navigation lights and marine radios continuously, guaranteeing your starting battery remains fully charged.
- Turn-Key Electric Start: Ignites the block instantly via your forward ignition switch, providing car-like starting reliability in freezing weather.
- 2.17:1 Gear Ratio: Multiplies engine torque massively, allowing small pontoons to carry heavier passenger loads without bogging down.
- Anti-Corrosion Castings: Blocks severe galvanic decay physically, protecting the aluminum powerhead block across decades of daily saltwater exposure.
- Clean Four-Stroke Combustion: Burns fuel cleanly without requiring two-stroke oil mixing, keeping your bilge clean and meeting strict lake emissions standards.
Why Choose Tohatsu MFS30DETL
Choosing this specific engine limits installation entirely to 20-inch tall transoms rigged with forward steering wheels and throttle boxes. You cannot bolt this onto a tiller-steered skiff. Correcting helm geometry is a key step when finding a reliable 20 inch shaft outboard replacement.
- Measure the vertical distance from your top transom edge to the keel bottom.
- Install corresponding mechanical control cables sized exactly for your specific boat length.
- Keep local lakes clean by running highly regulated four-stroke engine configurations.
Ideal Application and Vessel Fitment
This 20-inch remote-steered outboard excels on small fiberglass runabouts, high-transom aluminum console boats, and compact side-console pontoon logs. By connecting directly to a forward helm station, it shifts the operator weight forward, drastically improving the vessel running attitude and time-to-plane. The 20-inch shaft guarantees the water pump remains deeply submerged on tall transoms, providing a safe, reliable propulsion solution for recreational boaters needing a remote steer tohatsu outboard motor to navigate choppy coastal bays and large inland lakes.
Warranty, Support and Maintenance
Authorized recreational operation receives a 5-Year Limited Warranty alongside exceptional factory support. Registered commercial applications fall under a strict 1-Year Limited Warranty with zero corrosion coverage applied to the block. Scheduled maintenance requires replacing gearcase lubricants and changing oil filters at manual-specified intervals. Always save all physical service records. Your engine serial number acts as the only way to source exact genuine replacement parts. For product details and order support, Mulmotor offers assistance before your purchase is placed.
| SKU | TOH-MFS30DETL |
|---|---|
| Category | Outboard Motors |
| Shipping | Included in the price, worldwide Ships in 2–5 days, then 15–21 days in transit |
No reviews yet.
Sign in or create an account to rate this product and share your experience.