Taco 1635E3E2 1600 In-Line Centrifugal Pump 1HP 3PH

Move high-volume industrial water with Taco 1635E3E2 1 HP three-phase in-line centrifugal pump for commercial HVAC distribution. Its 208–230/460-volt motor draws 3.6A or 1.8A and provides up to 150 GPM with 34 feet of head. The 36-foot shut-off head is a zero-flow reference. Confirm the connection, phase rotation, and pump curve before installation.

The 1635E3E2 uses a cast-iron body and high-efficiency three-phase ODP motor in the supplied 1600 Series configuration. The application covers industrial HVAC distribution, while the supplied data lists 1 HP output and a 62-pound dry weight. Connection size, seal, impeller, pressure, temperature, dimensions, and motor RPM are not stated, so verify the final submittal.

Key Features & Benefits

- 1 HP Three-Phase Motor: Supports industrial HVAC distribution systems.
- 208–230/460-Volt Service: Requires field voltage and phase-rotation verification.
- 150 GPM Maximum Flow: Provides a stated capacity reference for system selection.
- 34 Feet Maximum Head: Helps compare system resistance and elevation requirements.
- 36-Foot Shut-Off Head: Identifies the listed zero-flow reference, not normal operating duty.
- 3.6A/1.8A Current: Assists circuit and disconnect planning.
- 62-Pound Dry Weight: Helps plan handling and support.

Why Choose Taco 1635E3E2 Three-Phase

The Taco 1635E3E2 provides a 1 HP three-phase package with defined flow, head, current, and weight data. It suits industrial HVAC systems where commercial power and high circulation demand are available.

- Build: Cast-iron construction and high-efficiency ODP motor define the supplied assembly.
- Value: Published hydraulic and electrical data support replacement planning.
- Audience: Fits HVAC contractors, plant engineers, facility managers, and industrial maintenance teams.

Applications & Use Cases

Use this pump in industrial HVAC distribution within the listed 150 GPM and 34-foot limits. Check the connection arrangement, pipe supports, valve clearance, motor access, phase rotation, and 62-pound handling requirement. Verify the actual system curve before startup.

Warranty & Support

- Warranty Terms: Taco warranty duration and coverage for this 1600 Series configuration require confirmation under current commercial terms.
- Coverage Review: Confirm date-code requirements, seal exclusions, electrical conditions, and claim procedures before purchase.
- Model Verification: Match Taco 1635E3E2, 1 HP, three-phase configuration, and SKU 1635E3E2-1-3 to the seller’s order.

Verify phase, voltage, motor protection, connections, and pump curve before wiring. Align the piping, purge air, inspect strainers, and check for leaks during commissioning. Purchase the Taco 1635E3E2 three-phase in-line centrifugal pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.