Taco 1615D3E1 Stainless Pump 1/2HP 3PH

Confirm the hydraulic rating before ordering Taco 1615D3E1 1/2 HP three-phase stainless steel pump for industrial potable-water loops. Its 208–230/460-volt motor draws 2.0A or 1.0A and is supplied with a 1-1/2-inch flange. The supplied data lists 120 GPM and 38 feet of head, but Taco’s current 1615 family range is listed at 7–73 GPM and 8–43 feet.

The 1615D3E1 uses a stainless steel NSF-certified casing, one-piece cast-bronze impeller, alloy-steel shaft with cupro-nickel sleeve, and ceramic-face/EPT elastomer seal. Its three-phase ODP motor runs at 1,725 RPM, while external overload protection is required. The supplied 120 GPM flow exceeds the published family range, so confirm the exact trim and curve before installation.

Key Features & Benefits

- 1/2 HP Three-Phase Motor: Supports industrial potable-water circulation if the verified curve matches.
- 208–230/460-Volt Service: Requires field voltage and phase-rotation checks.
- 120 GPM Listed Flow: Requires verification against Taco’s published 1615 family range.
- 38 Feet Listed Head: Falls within the published family head range but still requires exact curve review.
- 1-1/2-Inch Two-Bolt Flange: Supports replacement planning when the connection matches.
- Stainless Steel Casing: Provides the supplied NSF-certified body material.
- External Overload Required: Requires suitable motor protection in the control package.
- 50-Pound Dry Weight: Assists handling and support planning.

Why Choose Taco 1615D3E1 Three-Phase

This Taco configuration offers stainless steel construction and three-phase service for potable-water loops. The supplied flow value must be reconciled with the exact Taco curve before the pump is specified as a 120 GPM unit.

- Build: Stainless steel casing, cast-bronze impeller, and close-coupled construction define the package.
- Value: Correct curve verification can prevent oversizing and commissioning problems.
- Audience: Fits plumbing contractors, facility engineers, hospital maintenance teams, and industrial water operators.

Applications & Use Cases

Consider this pump for industrial potable-water loops only after the 120 GPM rating is verified. Check the 1-1/2-inch flange, 12-inch length, pipe supports, valve clearance, phase rotation, overload protection, and 50-pound handling requirement.

Warranty & Support

- Warranty Terms: Taco warranty duration and coverage for this stainless steel 1600 Series configuration require confirmation under current terms.
- Coverage Review: Confirm date-code requirements, seal exclusions, electrical conditions, and claim procedures before purchase.
- Model Verification: Match Taco 1615D3E1, 1/2 HP, three-phase configuration, and SKU 1615D3E1-1/2-3 to the seller’s order.

Verify the exact performance curve, voltage, current, flange, impeller, and motor protection before wiring. Purchase the Taco 1615D3E1 stainless steel three-phase pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.