Pair Honda BF250DXCRC with a large offshore center console or twin-engine cruiser when counter-rotation, iST electronic control, and a 25-inch shaft are required. Its 3,583 cc, 60-degree V6 engine uses 24 valves and SOHC operation, producing 250 HP at 5,800 RPM. Honda BF250DXCRC is a VTEC 4-stroke outboard with Programmed Fuel Injection, electric starting, Intelligent Shift and Throttle, and Power Trim and Tilt. The listed model is configured for twin-engine offshore performance.

At approximately 633 lbs dry, the engine weight should be verified and included in the combined twin-engine transom and balance calculations. Its 25-inch X-long shaft suits compatible tall transoms, while the 5,300–6,300 RPM full-throttle range helps guide propeller selection. The 90-amp alternator provides 60 net charging amps for supported navigation and fishing electronics. Confirm the exact iST and counter-rotation arrangement against the vessel’s serial-number and rigging documentation before purchase.

Key Features of Honda BF250DXCRC

- Use the 25-inch X-long shaft on boats designed for compatible twin-engine transoms.
- Counter-Rotation iST — provides electronic control for compatible port-side offshore configurations.
- 250 HP comes from a 3,583 cc V6 SOHC engine with 24 valves.
- Approximately 633 lbs dry weight requires careful transom, balance, and installation planning.
- Programmed Fuel Injection manages fuel delivery within the specified VTEC 4-stroke platform.
- Intelligent Shift and Throttle provides drive-by-wire operation for supported digital helm systems.
- Power Trim and Tilt adjusts engine position during acceleration, cruising, docking, and trailering.
- 90 amps total with 60 net charging amps support compatible marine electronics.

Why Choose the Honda BF250DXCRC

This configuration is aimed at twin-engine offshore builds that require both counter-rotation and electronic controls. The 25-inch shaft addresses the listed transom requirement, while the 250 HP V6 gives the vessel a defined power option when the installation limits are satisfied.

- Counter-rotation supports compatible twin layouts
- iST control suits digital helm systems
- 250 HP fits approved offshore vessels

Applications & Use Cases

Honda BF250DXCRC is intended for large offshore center consoles, twin-engine cruisers, and similar performance hulls using compatible 25-inch transoms. It can support offshore fishing, coastal cruising, and recreational travel when the vessel accepts the listed electronic and counter-rotation setup.

- Large offshore center consoles
- Twin-engine cruisers with tall transoms
- Digital offshore fishing configurations

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for engine oil, gearcase lubricant, filters, spark plugs, cooling-system checks, iST controls, counter-rotation components, and Power Trim and Tilt. Confirm the listed dry weight, fluid quantities, service intervals, and dealer support before purchase.