Give Honda BF250DK1URA a role on a high-transom offshore hull when 250 HP, a 30-inch U-long shaft, and traditional mechanical controls are required. Its 3.6-liter, 60-degree V6 engine uses 24 valves and SOHC operation, producing 250 HP at 5,800 RPM for properly rated offshore boats and larger recreational vessels. Honda BF250DK1URA is a Signature Silver 4-stroke outboard with VTEC, Programmed Fuel Injection, electric starting, remote mechanical control, and Power Trim & Tilt. The standard-rotation configuration suits compatible single-engine or standard-rotation installations.

At 622 lbs dry, the motor should be included in transom, repower, trailer, and boat-balance calculations. Its 5,300–6,300 RPM full-throttle range gives owners a reference for propeller selection, while the 2.00:1 gear ratio supports forward, neutral, and reverse operation. The 90-amp alternator supplies 60 charging amps for supported navigation equipment, pumps, lighting, batteries, and communication systems. The listed engine oil capacity is 7.8 L with filter, while gearcase lubricant service should follow the applicable Honda owner’s manual.

Key Features of Honda BF250DK1URA

- Fit the 30-inch U-long shaft to boats designed for extended transom reach.
- V6 Engine — combines 3.6 liters of displacement with a 60-degree, 24-valve SOHC layout.
- 250 HP at 5,800 RPM gives properly rated offshore hulls a defined power option.
- 622 lbs dry weight requires careful transom capacity and repower balance planning.
- Programmed Fuel Injection manages fuel delivery within the supplied V6 4-stroke configuration.
- Remote Mechanical Control connects throttle and shifting to conventional helm rigging.
- Power Trim & Tilt adjusts engine position during acceleration, cruising, docking, and trailering.
- 90 amps total with 60 charging amps support compatible onboard electrical systems.

Why Choose the Honda BF250DK1URA

The U-long shaft gives this model a specific place on boats with extended transom requirements. Its 250 HP V6 provides a defined output for properly approved hulls, while mechanical controls suit owners maintaining a conventional cable-rigged helm.

- 30-inch shaft suits extended transoms
- 250 HP supports approved offshore hulls
- Mechanical controls fit traditional rigging

Applications & Use Cases

Honda BF250DK1URA is suited to high-transom offshore boats, fishing vessels, and larger recreational hulls using a compatible 30-inch reach. It can support offshore fishing, coastal cruising, harbor travel, and repower work when the vessel accepts the engine’s weight, horsepower, shaft length, and mechanical controls.

- High-transom offshore boats
- Fishing vessels using mechanical controls
- Large recreational hulls requiring 250 HP

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the Honda owner’s manual for the 7.8 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system checks, remote controls, and Power Trim & Tilt. Confirm U-long shaft fitment, service intervals, warranty registration, and dealer support before purchase.