Place Honda BF250DK1UDA on an offshore center console or cruiser when a 30-inch U-long shaft, standard rotation, and iST digital control are required. Its 3.6-liter, 60-degree V6 engine uses 24 valves and SOHC operation, producing 250 HP at 5,800 RPM. Honda BF250DK1UDA is a Grand Prix White VTEC 4-stroke outboard with Programmed Fuel Injection, electric starting, Intelligent Shift and Throttle, and Power Trim & Tilt. The standard-rotation configuration suits compatible digital-ready vessels.

The 622-lb dry weight should be included in transom, repower, trailer, and total boat-balance calculations. Its 30-inch U-long shaft provides the reach identified for the listed high-transom application, while the 5,300–6,300 RPM full-throttle range helps guide propeller selection. A 90-amp alternator supplies 60 charging amps for supported navigation systems, pumps, lighting, batteries, and communication equipment. The listed oil capacity is 7.8 L, with gearcase and iST service directed by the Honda manual.

Key Features of Honda BF250DK1UDA

- Fit the 30-inch U-long shaft to boats requiring extended transom mounting.
- Standard Rotation — identifies the listed drive arrangement for compatible digital installations.
- 250 HP at 5,800 RPM comes from a 3.6-liter V6 SOHC powerhead.
- 622 lbs dry weight requires careful transom strength and repower balance planning.
- Intelligent Shift and Throttle provides drive-by-wire control for supported digital helm systems.
- Grand Prix White Finish identifies the listed exterior color for this configuration.
- Programmed Fuel Injection manages fuel delivery within the specified V6 4-stroke engine.
- 90 amps total with 60 charging amps support compatible offshore electronics and accessories.

Why Choose the Honda BF250DK1UDA

The U-long shaft gives this model a specific role on high-transom boats, while standard rotation and iST controls suit compatible digital installations. Its 250 HP rating provides a defined power option for properly approved offshore vessels carrying heavier recreational loads.

- 30-inch shaft fits compatible U-long transoms
- iST controls support digital helm systems
- 250 HP suits approved offshore boats

Applications & Use Cases

Honda BF250DK1UDA is suited to offshore center consoles, cruisers, and day boats requiring a 30-inch shaft and compatible iST controls. It can support offshore fishing, coastal cruising, family boating, and harbor travel when the vessel accepts the engine’s weight and horsepower.

- Offshore center consoles with high transoms
- Digital cruisers using standard rotation
- Recreational boats requiring 250 HP

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 7.8 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system checks, iST controls, and Power Trim & Tilt. Confirm U-long shaft fitment, service intervals, warranty registration, and dealer support before purchase.