Support Honda BF250DK1UCRA in a port-side twin offshore installation when a 30-inch U-long shaft and mechanical counter-rotation are needed. Its 3.6-liter, 60-degree V6 engine uses 24 valves, SOHC operation, and VTEC technology to produce 250 HP at 5,800 RPM. Honda BF250DK1UCRA is a mechanical-control 4-stroke outboard with Programmed Fuel Injection, electric starting, remote mechanical controls, and Power Trim & Tilt. The configuration is intended for compatible dual-engine offshore cruisers.

At 622 lbs dry, the engine must be counted within the combined weight of the twin installation, fuel, batteries, rigging, passengers, and equipment. The 30-inch U-long shaft addresses extended transom requirements, while the 5,300–6,300 RPM full-throttle range provides a reference for propeller selection. The 90-amp alternator supplies 60 charging amps for supported electronics. Engine oil capacity is listed at 7.8 L, with gearcase and counter-rotation service governed by the applicable Honda manual.

Key Features of Honda BF250DK1UCRA

- Mount the 30-inch U-long shaft on boats designed for extended transom reach.
- Counter-Rotation Drive — provides the listed port-side arrangement for twin mechanical-control systems.
- VTEC Engine — combines 3.6 liters, 24 valves, SOHC operation, and 250 HP output.
- 622 lbs dry weight affects twin-engine transom capacity, balance, and trailer planning.
- Programmed Fuel Injection manages fuel delivery throughout the supplied V6 4-stroke system.
- Remote Mechanical Control connects throttle and shifting to conventional helm rigging.
- Power Trim & Tilt changes engine angle during acceleration, cruising, docking, and trailering.
- 90 amps total with 60 charging amps support compatible offshore electrical equipment.

Reasons to Choose the Honda BF250DK1UCRA

The counter-rotation design gives this model a defined position in twin mechanical-control systems. Its 30-inch shaft suits boats with extended transom requirements, while the 250 HP V6 provides a clear output level for properly rated offshore vessels.

- Counter-rotation supports listed port-side twin use
- Mechanical controls fit conventional rigging
- 250 HP suits approved offshore cruisers

Applications & Use Cases

Honda BF250DK1UCRA is intended for port-side twin installations on offshore cruisers using mechanical controls and 30-inch transoms. It can support offshore fishing, coastal travel, harbor cruising, and recreational operation when the vessel accepts the combined weight, counter-rotation arrangement, and horsepower.

- Port-side twin offshore configurations
- Offshore cruisers with U-long transoms
- Mechanical-control recreational vessels

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 7.8 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system checks, mechanical controls, Power Trim & Tilt, and counter-rotation service. Confirm rigging, warranty registration, service intervals, and dealer support before purchase.