Place the Honda BF200DK1XCRA 200HP Outboard on a twin-engine offshore boat when a 25-inch X-long shaft and port-side counter-rotation are required with remote mechanical control. Its 3.6-liter 60-degree V6 engine uses 24 valves and produces 200 HP at 5,500 RPM. Honda BF200DK1XCRA is a 4-stroke outboard with Programmed Fuel Injection, electric starting, Power Trim & Tilt, and a 1.86:1 gear ratio. The counter-rotation layout is the primary installation distinction.

At 613 lbs dry, this engine must be included in the combined weight of the twin installation, fuel, batteries, rigging, and passengers. The 25-inch shaft targets boats with taller transoms, while the 5,000–6,000 RPM full-throttle range provides a setup reference for propeller selection. The 90-amp alternator supplies 60 charging amps for supported onboard electronics. The listed oil capacity is 7.8 L with filter, with gearcase lubricant service determined by the Honda owner’s manual.

Honda BF200DK1XCRA Counter-Rotation 25-Inch Outboard for Mechanical Twins

- Use the 25-inch X-long shaft on boats built for compatible tall-transom mounting.
- V6 Powerhead — delivers 200 HP at 5,500 RPM from a 3.6-liter SOHC design.
- Port-side twin installations receive the listed counter-rotation configuration for mechanical control systems.
- 613 lbs dry weight affects transom capacity, balance, trailer loading, and repower planning.
- Programmed Fuel Injection manages fuel delivery throughout the 24-valve 4-stroke engine.
- Remote mechanical controls connect throttle and shifting to conventional helm rigging.
- Power Trim & Tilt changes engine position during acceleration, cruising, docking, and trailering.
- 90 amps total with 60 charging amps support compatible electrical equipment.

Reasons to Choose the Honda BF200DK1XCRA

The counter-rotation configuration gives this model a specific role in twin mechanical-control installations. Its 25-inch shaft fits taller transoms, while the 200 HP rating provides a defined power option for approved offshore boats. Mechanical controls keep the rigging compatible with conventional helm systems.

- Counter-rotation supports listed port-side twin use
- 25-inch shaft matches compatible tall transoms
- Mechanical controls fit conventional rigging

Applications & Use Cases

Honda BF200DK1XCRA is intended for port-side twin mechanical installations on offshore fishing boats and larger recreational hulls using 25-inch transoms. It can support offshore fishing, coastal travel, harbor cruising, and repower work when the combined engine weight and horsepower remain within approved limits.

- Offshore fishing boats with X-long transoms
- Port-side twin mechanical configurations
- Large recreational hulls requiring 200 HP

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 7.8 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system inspection, Power Trim & Tilt, and counter-rotation service. Confirm twin-engine compatibility, warranty registration, dealer support, and regional coverage before purchase.