Power a single-engine offshore center console with the Honda BF150DK1XRA 150HP Outboard when a 25-inch transom and traditional mechanical rigging are already part of the boat. Its 2,354 cc inline four-cylinder DOHC engine uses 16 valves and VTEC technology, producing 150 HP at 5,500 RPM. Honda BF150DK1XRA is a Grand Prix White 4-stroke outboard with Programmed Fuel Injection, electric starting, remote mechanical control, and Power Trim & Tilt. The X-long shaft is intended for compatible taller transoms.

The 485-lb dry weight should be included in transom, trailer, repower, and boat-balance calculations. Its 5,000–6,000 RPM full-throttle range helps establish a reference for propeller selection after rigging, while the 2.14:1 gear ratio supports standard F-N-R operation. A 40-amp alternator delivers 30 charging amps for supported navigation displays, pumps, lighting, and accessories. The listed engine oil capacity is 6.7 L with filter, with gearcase service directed by the applicable Honda manual.

Honda BF150DK1XRA White 25-Inch Outboard for Mechanical Rigging

- Mount the 25-inch X-long shaft on boats designed for compatible tall transoms.
- Grand Prix White Finish — provides the listed exterior color for this mechanical-control model.
- VTEC Engine — produces 150 HP at 5,500 RPM from a 2,354 cc DOHC four-cylinder layout.
- 485 lbs dry weight requires suitable transom capacity and repower balance planning.
- Programmed Fuel Injection manages fuel delivery through the supplied 4-stroke engine.
- Remote mechanical controls keep throttle and shifting connected to conventional helm rigging.
- Power Trim & Tilt changes engine angle during acceleration, cruising, docking, and trailering.
- 40 amps total with 30 charging amps support compatible marine electronics.

Why Choose the Honda BF150DK1XRA

This version suits owners who want 150 HP with conventional mechanical controls instead of an iST system. The 25-inch shaft addresses taller-transom fitment, while the Grand Prix White finish provides the listed appearance for selected offshore boat packages. The boat must still meet all weight and horsepower requirements.

- Mechanical controls suit conventional cable rigging
- 25-inch shaft fits compatible tall transoms
- 150 HP supports approved offshore hulls

Applications & Use Cases

Honda BF150DK1XRA is intended for single-engine offshore center consoles and recreational hulls using a 25-inch transom with compatible cable rigging. It can support offshore fishing, coastal cruising, harbor travel, and family boating when the vessel accepts the engine’s weight and 150 HP output.

- Offshore center consoles with X-long transoms
- Single-engine boats using cable controls
- Recreational fishing and coastal cruising

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the Honda owner’s manual for the 6.7 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system checks, mechanical controls, and Power Trim & Tilt. Confirm warranty registration, maintenance intervals, dealer support, and regional coverage before purchase.