Match the Honda BF140AK1XCRA 140HP Outboard to a twin-engine offshore fishing boat that requires a 25-inch shaft, mechanical remote controls, and a port-side counter-rotation unit. Its 2,354 cc inline four-cylinder DOHC engine uses 16 valves and VTEC technology, delivering 140 HP at 5,500 RPM. Honda BF140AK1XCRA is a Signature Silver 4-stroke outboard with Programmed Fuel Injection, electric starting, remote mechanical control, and Power Trim & Tilt. The counter-rotation configuration is intended for the listed twin mechanical setup.

The 485-lb dry weight should be included when calculating total engine weight, transom load, and boat balance. The 25-inch X-long shaft is intended for compatible tall transoms, while the 5,000–6,000 RPM full-throttle range helps guide propeller selection after rigging. A 40-amp alternator supplies 30 charging amps for supported marine electronics and accessories. The listed engine oil capacity is 6.7 L with filter, while gearcase lubricant specifications should be confirmed through the correct Honda documentation.

Honda BF140AK1XCRA Counter-Rotation 25-Inch Outboard for Mechanical Twins

- Use the 25-inch X-long shaft on boats built for compatible tall-transom installations.
- VTEC Powerhead — combines 2,354 cc displacement with a DOHC four-cylinder, 16-valve 4-stroke design.
- Port-side twin applications receive the listed counter-rotation configuration for mechanical control systems.
- 485 lbs dry weight affects transom capacity, balance, trailer loading, and repower calculations.
- Programmed Fuel Injection manages fuel delivery within the supplied Honda engine configuration.
- Remote mechanical controls connect throttle and shifting to conventional helm rigging.
- Power Trim & Tilt adjusts engine position during acceleration, cruising, docking, and trailering.
- 40 amps total with 30 charging amps support compatible electrical equipment.

Reasons to Choose the Honda BF140AK1XCRA

The counter-rotation design gives this model a specific role in twin mechanical-control installations. It retains conventional remote rigging while providing a 140 HP power option for properly rated offshore fishing boats. The 25-inch shaft also matches the taller transom requirement identified for this configuration.

- Counter-rotation supports listed port-side twin setups
- Mechanical controls fit conventional cable rigging
- 140 HP suits approved offshore hulls

Applications & Use Cases

Honda BF140AK1XCRA is intended for port-side twin mechanical configurations on offshore fishing boats with compatible 25-inch transoms. It can support offshore fishing, coastal travel, harbor cruising, and recreational operation when the boat is designed for twin engines and the total installed weight remains within its approved limits.

- Offshore fishing boats with tall transoms
- Port-side twin mechanical installations
- Coastal cruising with remote controls

Warranty, Support & Maintenance

The supplied product information identifies a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for the 6.7 L oil capacity with filter, gearcase lubricant, filters, spark plugs, cooling-system checks, Power Trim & Tilt, and counter-rotation service. Confirm twin-engine rigging, warranty registration, dealer support, and regional coverage before installation.