Choose the Honda BF10DK3LH 9.9HP Outboard when a utility boat needs a 20-inch shaft and simple tiller control without the added equipment of a remote steering system. Its 222 cc inline two-cylinder SOHC 4-stroke engine produces 9.9 HP at 5,000 RPM, giving a properly rated boat useful propulsion for fishing, tender work, shoreline travel, and routine utility use. Honda BF10DK3LH is a manual-start portable outboard with a single carburetor, 6-amp alternator, and manual tilt. The long-shaft configuration is intended for compatible 20-inch transoms.

The 93-pound dry weight makes the motor suitable for owners who need to move, store, or install the engine without handling a larger high-output unit. Its full-throttle range of 5,000 to 6,000 RPM provides a reference for checking propeller selection after the boat is rigged. Direct tiller operation keeps steering and throttle control at the motor, while the manual tilt system allows the lower unit to be raised when the operating situation requires additional clearance. Confirm transom height, hull rating, load capacity, and propeller fitment before installation.

Honda BF10DK3LH 20-Inch Tiller Outboard for Utility Boats

- Fit the 20-inch long shaft to utility boats designed for this transom height.
- Engine Layout — uses a 222 cc inline two-cylinder SOHC 4-stroke configuration.
- 9.9 HP at 5,000 RPM provides propulsion for properly rated small boats and tenders.
- 93 lbs dry weight keeps transport and installation more manageable for portable applications.
- Control steering and throttle directly through the manual tiller-handle arrangement.
- Fuel System — uses a single carburetor for the supplied engine configuration.
- Operate within the 5,000–6,000 RPM range when checking propeller and boat setup.
- 6-amp alternator supplies electrical output for supported utility-boat equipment.

Why Choose the Honda BF10DK3LH

The 20-inch shaft targets boats with a long transom, while manual controls keep the installation uncomplicated. The 9.9 HP rating gives compatible utility boats practical power for everyday movement, and the 93-pound dry weight remains manageable during seasonal storage or transport.

- 20-inch shaft fits compatible long-transom boats
- Manual tiller operation avoids remote-control rigging
- 6-amp output supports basic electrical accessories

Applications & Use Cases

Use Honda BF10DK3LH on 20-inch-transom utility boats, small fishing boats, and tenders when manual starting and tiller steering suit the operator. It can support shoreline travel, fishing access, dock movement, and general small-boat work within the vessel’s approved horsepower and weight limits.

- 20-inch utility boats with compatible transoms
- Small fishing boats using tiller control
- Tenders requiring portable 9.9 HP propulsion

Warranty, Support & Maintenance

The supplied product information lists a 5-year non-declining standard warranty. Follow the applicable Honda owner’s manual for engine oil, gearcase lubricant, spark plug, carburetor, cooling-system, and tiller-control service. Exact fluid quantities and service intervals should be confirmed for the serial-number range with an authorized Honda Marine dealer.