Yamaha F300UCB2 300HP Outboard – 30in Shaft, V6
$15,273
☆☆☆☆☆ (0)
For charter work, Honda BF100AK1LRTC gets to work with 100 horsepower. A 20-inch shaft fits standard transoms. The block runs VTEC technology. Well matched to pontoons and bay boats. - Rated at 100 horsepower - 20-inch shaft, standard fit - PGM-FI fuel delivery system - Straightforward to service a
5219.00 USD
In stock
5219.00 USD
In stock
Match the Honda BF100AK1LRTC 100HP 4-Stroke Outboard to a boat with a 20-inch long transom when remote steering and midrange power are the main installation requirements. Its 1,496 cc inline four-cylinder engine provides 100 HP for properly rated fishing boats, center consoles, and comparable recreational hulls. Honda BF100AK1LRTC uses VTEC and Programmed Fuel Injection, with electric starting and Power Trim and Tilt. The 20-inch shaft keeps this model suited to standard long-transom boat geometry.
The 366-lb dry weight should be considered alongside the transom, fuel, passengers, and onboard equipment before rigging. Peak output arrives at 5,900 RPM, with a 5,500–6,300 RPM full-throttle range that helps owners evaluate propeller selection after installation. A 44-amp alternator provides 35 charging amps, while BLAST, Lean Burn Control, and NMEA 2000 compatibility add functions for properly equipped boats. Exact fluid quantities and service intervals should be confirmed in the applicable Honda manual.
Honda BF100AK1LRTC 20-Inch Remote-Control Outboard Configuration
- Mount the 100 HP engine on boats built around a compatible 20-inch long transom.
- Programmed Fuel Injection — manages fuel delivery within the 1,496 cc four-cylinder 4-stroke engine.
- Low-speed planing response receives additional support from Honda BLAST technology.
- 366 lbs dry weight belongs in transom and total boat-loading calculations.
- Connect supported engine information with compatible displays through NMEA 2000.
- Control Arrangement — combines electric starting with remote steering for helm-based operation.
- Lean Burn Control manages specified cruising operation across supported engine applications and conditions.
Why Choose the Honda BF100AK1LRTC
This version suits owners who already have a 20-inch transom and want remote operation from the helm. The 100 HP rating gives a properly approved hull a clear power level, while BLAST and Lean Burn Control add specified engine functions for acceleration and cruising. NMEA 2000 compatibility is useful when the boat carries supported displays.
- 20-inch shaft suits standard long-transom installations
- Remote steering keeps primary control at the helm
- NMEA 2000 supports compatible marine displays
Applications & Use Cases
Honda BF100AK1LRTC fits recreational fishing boats, center consoles, and similar hulls using a 20-inch transom. It can be used for fishing runs, family cruising, harbor travel, and routine transportation when the boat supports the engine’s weight and horsepower. Confirm steering hardware, rigging, propeller selection, and transom capacity before installation.
- Fishing boats using compatible 20-inch transoms
- Center consoles with remote helm controls
- Recreational cruising with supported marine electronics
Warranty, Support & Maintenance
Routine service should follow the applicable Honda owner’s manual and maintenance schedule. Important tasks include engine oil service, gearcase lubricant checks, filter replacement, cooling-system inspection, spark plug inspection, and remote-control adjustment. The supplied product information lists a 5-year non-declining standard warranty. Confirm registration, labor coverage, dealer support, and regional warranty conditions before purchase.
| SKU | WC-17754 |
|---|---|
| Category | Outboard Motors |
| Shipping | Included in the price, worldwide Ships in 2–5 days, then 15–21 days in transit |
No reviews yet.
Sign in or create an account to rate this product and share your experience.