Domestic Pump DM1119 Domestic 3HP-3PH-3500-200v ODP Motor Only

Match a pump-end motor with Domestic Pump DM1119, a 3 HP, 3500 RPM motor designed for high-head Centriflo packaged-unit replacement service. This is a motor-only component, not a complete pump, so the pump-end coupling, shaft fit, frame interface, and electrical requirements must be checked before ordering. Its 200 V special low-voltage three-phase configuration also requires careful field verification before installation.

The two-pole motor uses an open drip proof enclosure and a JM footless frame for specific pump-end mating. The supplied data identifies 3500 RPM speed, 3 HP output, and 200 V three-phase power, but it does not state amp draw, frame dimensions, shaft diameter, rotation, service factor, or mounting measurements. Compare the motor to the original Centriflo assembly and confirm the mating details before energizing.

Key Features & Benefits

- 3 HP Motor: Provides the listed power rating for compatible high-head packaged pump units.
- 3500 RPM Speed: Matches the specified two-pole operating speed for high-speed pump-end service.
- 200 V Three-Phase: Requires dedicated voltage verification before connection to avoid an electrical mismatch.
- ODP Enclosure: Identifies the open drip proof motor style for proper equipment placement.
- JM Footless Frame: Supports specific pump-end mating where the original frame interface matches.
- Motor-Only Configuration: Helps buyers separate the replacement motor from the existing pump-end assembly.

Why Choose Domestic Pump DM1119

The DM1119 is intended for targeted motor replacement, not whole-pump replacement. Its value depends on accurate matching of horsepower, speed, voltage, frame, shaft, and pump-end interface with the original Centriflo package.

- Build: ODP enclosure, JM footless frame, and two-pole 3500 RPM construction provide defined motor details.
- Value: Replacing only the motor may reduce equipment cost and piping disruption when the pump end remains serviceable.
- Audience: Designed for industrial pump technicians, packaged-unit service contractors, facility engineers, and maintenance buyers.

Applications & Use Cases

Use Domestic Pump DM1119 as a replacement motor for compatible high-head Centriflo packaged units. The supplied specifications do not include frame dimensions, shaft measurements, weight, rotation, or mounting-hole details, so verify the pump-end interface, coupling fit, shaft alignment, electrical clearance, and ODP enclosure location before purchase.

Warranty & Support

- Warranty Terms Require Confirmation: Verify duration, coverage, registration, exclusions, and authorized service requirements with the seller.
- Confirm DM1119, 3 HP, 3500 RPM, 200 V three-phase, ODP, and JM footless-frame details before ordering.

Disconnect and lock out power, document motor rotation, inspect the coupling, measure shaft alignment, and verify the 200 V three-phase supply before startup. Monitor vibration, bearing noise, temperature, and pump-end performance after installation. Purchase the Domestic Pump DM1119 3 HP replacement motor through Mulmotor.com for authentic equipment, applicable warranty support, and pump-matching assistance.