Steam condensate systems use Domestic 673PF Centriflo for boiler feed applications requiring 60 GPM at 40 PSIG. Its 3 HP motor operates at 1750 RPM, while the impeller is trimmed to the specified duty curve for 92.4 feet of head. Confirm suction conditions, condensate temperature, motor rotation, and the selected duty point before startup to protect the pump from cavitation and overload.

The Domestic Series 673PF uses low-speed operation and a duty-specific impeller trim for industrial steam condensate and boiler-feed service. The 60 GPM at 40 PSIG operating point provides a defined reference for system selection, but verified data does not include voltage, phase, amp draw, seal type, connection size, operating temperature, dimensions, weight, thermal protection, or self-priming capability. Follow the manufacturer’s pump curve and installation requirements before commissioning.

Key Features of Domestic 673PF Centriflo

- 3 HP motor supports industrial steam condensate and continuous boiler-feed pumping requirements.
- 1750 RPM low-speed operation suits the specified boiler-feed circulation configuration.
- 60 GPM duty point supports high-volume condensate transfer at selected operating conditions.
- 40 PSIG duty pressure corresponds to approximately 92.4 feet of head.
- Impeller trimming aligns hydraulic output with the specified duty curve.
- Domestic Series 673PF configuration suits industrial boiler-feed and condensate systems.
- Voltage, phase, amperage, seal, connections, temperature, dimensions, weight, protection, and warranty require confirmation.

Why Choose Domestic 673PF Centriflo

This Domestic boiler-feed pump combines low-speed operation with duty-point impeller trimming for industrial condensate systems.

- Build: Duty-specific impeller trimming supports hydraulic matching, while final casing and seal materials require verification.
- Value: Matching 60 GPM and 40 PSIG requirements can reduce recirculation losses, overload events, and boiler-feed interruptions.
- Audience: Boiler contractors, steam-system engineers, industrial maintenance teams, plant operators, and condensate specialists can specify this model.

Applications & Use Cases

Use the Domestic 673PF Centriflo for industrial steam condensate, boiler feed, plant utility water, and continuous-duty heating systems. Physical dimensions, unit weight, and connection reach were not supplied, so verify pipe spacing, valve access, motor clearance, lifting room, suction layout, and service requirements before installation.

Warranty & Support

- Warranty: A model-specific factory warranty term was not verified in the supplied data and requires confirmation through Domestic Pump or the authorized seller.
- Confirm duty point, motor compatibility, suction conditions, phase rotation, impeller trim, and seal requirements during commissioning.

Prime the pump as required, inspect condensate strainers, monitor the seal area, and verify flow and pressure during scheduled service. Purchase the Domestic 673PF Centriflo boiler-feed pump from Mulmotor.com for authentic equipment, applicable factory warranty protection, and pump support.