Low-flow HVAC loops use Bell & Gossett Series e-80 Model 1.5 x 1.5 x 7C for compact building circulation. Its 1 HP, 1750 RPM vertical in-line pump uses 1.5-inch suction and discharge connections, a 7-inch C-size volute, and an internal self-flushing mechanical seal. Confirm the pump curve, flange alignment, motor data, and flooded system conditions before startup.

The Series e-80 uses a vertical in-line arrangement with an internal self-flushing mechanical seal for compatible HVAC circulation. Its 1.5-inch connections support smaller hydronic piping, while the 7-inch nominal impeller identifies the C-size volute configuration. Verified data does not include voltage, phase, amp draw, GPM, maximum head, impeller material, operating temperature, dimensions, weight, thermal protection, or self-priming capability, so verify the complete submittal.

Key Features of Bell & Gossett Series e-80 Model 1.5 x 1.5 x 7C

- 1 HP motor supports low-flow HVAC and small-loop hydronic circulation.
- 1750 RPM operation suits the specified vertical in-line pump configuration.
- 1.5-inch suction and discharge connections support smaller commercial HVAC piping.
- 7-inch nominal impeller fits the specified C-size volute arrangement.
- Internal self-flushing mechanical seal supports seal-area cleanliness during circulation.
- Vertical in-line construction supports compact mechanical-room piping layouts.
- Small-loop profile suits low-flow building heating and cooling systems.
- Voltage, phase, amperage, flow, head, temperature, dimensions, weight, protection, and warranty require confirmation.

Why Choose Bell & Gossett Series e-80 Model 1.5 x 1.5 x 7C

This Bell & Gossett compact HVAC pump combines small connections with self-flushing sealing for low-flow circulation.

- Build: Vertical in-line construction, C-size volute, and self-flushing sealing support compatible commercial HVAC systems.
- Value: Compact piping and internal seal flushing can simplify equipment-room planning and routine service access.
- Audience: Commercial HVAC contractors, small-loop hydronic installers, boiler technicians, building engineers, and maintenance teams can specify this model.

Applications & Use Cases

Use the Bell & Gossett Series e-80 Model 1.5 x 1.5 x 7C for small-loop recirculation, low-flow HVAC, commercial heating, and compact hydronic systems. Physical dimensions, unit weight, and port reach were not supplied, so verify 1.5-inch piping, valve clearance, motor access, lifting room, and vertical installation requirements before purchase.

Warranty & Support

- Warranty: Bell & Gossett general product terms provide one year from installation or 18 months from product date code, whichever occurs first.
- Verify the operating curve, purge air, inspect the self-flushing seal, confirm alignment, and check flow direction during commissioning.

Flush system debris, protect the suction path from air entry, and inspect the seal and flange areas during scheduled HVAC maintenance. Purchase the Bell & Gossett Series e-80 Model 1.5 x 1.5 x 7C low-flow HVAC pump from Mulmotor.com for authentic equipment, applicable factory warranty protection, and pump support.