Run quiet secondary HVAC circulation with Bell & Gossett e-1510 1.5BC 3 HP, a base-mounted pump using a 1750 RPM TEFC motor. The 2-1/2-inch suction and 1-1/2-inch discharge arrangement suits commercial systems where larger inlet piping and lower-speed operation are preferred. Its bronze-fitted construction fits compatible hydronic service, while the TEFC enclosure is useful in dusty mechanical rooms. Verify the system curve, base, coupling, and electrical data before installation.

The four-pole motor drives the pump through a base-mounted assembly designed for planned alignment and service access. The supplied specifications identify 3 HP, 1750 RPM, TEFC construction, and bronze-fitted materials, but do not state voltage, phase, amp draw, flow, head, dimensions, weight, or seal material. Confirm the complete submittal, foundation requirements, suction conditions, and pipe support before startup.

Key Features & Benefits

- 3 HP Motor: Supports commercial HVAC circulation and compatible secondary-loop duties.
- 1750 RPM Speed: Provides a four-pole operating reference for steady hydronic service.
- TEFC Enclosure: Helps protect the motor in dusty mechanical-room environments.
- 2-1/2-Inch Suction: Accommodates the larger inlet connection specified for the 1.5BC case.
- 1-1/2-Inch Discharge: Defines the outlet size for compatible commercial piping.
- Bronze-Fitted Construction: Identifies the pump’s specified material arrangement for HVAC service.
- Base-Mounted Design: Requires foundation support, coupling alignment, and controlled pipe strain.
- Low-Speed Operation: Suits quiet secondary circulation where the duty point is correctly matched.

Why Choose Bell & Gossett e-1510 1.5BC 3 HP

The e-1510 1.5BC gives commercial installers a 3 HP base-mounted pump with TEFC protection, bronze-fitted construction, and a low-speed motor arrangement.

- Build: Base-mounted construction, TEFC motor enclosure, 1.5BC case, and bronze-fitted materials define the supplied configuration.
- Value: TEFC protection can suit dusty rooms, while correct alignment supports planned coupling and bearing service.
- Audience: Intended for commercial HVAC contractors, facility engineers, industrial maintenance buyers, and mechanical-room installers.

Applications & Use Cases

Apply Bell & Gossett e-1510 1.5BC 3 HP to quiet secondary HVAC circulation, commercial hydronic systems, and dusty mechanical rooms. The supplied data identifies 2-1/2-inch suction and 1-1/2-inch discharge connections but does not provide dimensions, unit weight, base measurements, or coupling details. Verify foundation space, lifting access, alignment, and service clearance before installation.

Warranty & Support

- Warranty Terms Require Confirmation: Verify duration, coverage, registration, exclusions, and authorized service requirements with the seller.
- Confirm the 1.5BC case, 3 HP motor, 1750 RPM speed, TEFC enclosure, and bronze-fitted construction before ordering.

Set the pump on a suitable base, align the coupling, verify suction and discharge piping, and confirm the motor’s electrical data before startup. Prime the system, purge air, and monitor pressure, vibration, leakage, and bearing temperature during commissioning. Purchase the Bell & Gossett e-1510 1.5BC 3 HP base-mounted HVAC pump through Mulmotor.com for authentic equipment, applicable warranty support, and pump assistance.