Keep quiet secondary HVAC circulation moving with Bell & Gossett e-1510 1.5BC 2 HP, a base-mounted pump using a 1750 RPM TEFC motor. Its 2-1/2-inch suction and 1-1/2-inch discharge connections suit district cooling, commercial hydronic loops, and mechanical rooms where dust protection matters. Confirm the system curve, foundation, coupling alignment, and motor electrical data before installation.

The four-pole motor drives the bronze-fitted pump through a base-mounted assembly intended for planned service access. The supplied data identifies very low noise, TEFC construction, and 2 HP output, but voltage, phase, amp draw, flow, head, dimensions, weight, and seal material were not supplied. Verify the current submittal and provide proper pipe support before startup.

Key Features & Benefits

- 2 HP Motor: Supports quiet secondary HVAC circulation and district-cooling applications.
- 1750 RPM Speed: Provides a four-pole reference for steady commercial pumping.
- TEFC Enclosure: Helps protect the motor in dusty mechanical-room environments.
- 2-1/2-Inch Suction: Accommodates the larger inlet connection specified for the 1.5BC case.
- 1-1/2-Inch Discharge: Defines the outlet size for compatible hydronic piping.
- Bronze-Fitted Construction: Identifies the listed material arrangement for compatible HVAC service.
- Base-Mounted Design: Requires foundation support, coupling alignment, and controlled pipe strain.
- Very Low Noise: Suits mechanical rooms where quieter circulation is important.

Why Choose Bell & Gossett e-1510 1.5BC 2 HP

The e-1510 1.5BC combines 2 HP power, TEFC protection, and 1750 RPM operation for commercial secondary HVAC systems where quiet service and planned alignment matter.

- Build: Base-mounted construction, TEFC motor, bronze-fitted pump, and 1.5BC case define the supplied arrangement.
- Value: TEFC protection can suit dusty rooms, while low-speed operation supports steady circulation.
- Audience: Intended for commercial HVAC contractors, district-energy technicians, facility engineers, and mechanical-room installers.

Applications & Use Cases

Apply Bell & Gossett e-1510 1.5BC 2 HP to quiet secondary HVAC circulation, district cooling, and compatible commercial hydronic systems. The supplied data identifies 2-1/2-inch suction and 1-1/2-inch discharge connections but does not provide dimensions, weight, base measurements, or coupling details. Verify foundation space, lifting access, alignment, and service clearance before installation.

Warranty & Support

- Warranty Terms Require Confirmation: Verify duration, coverage, registration, exclusions, and authorized service requirements with the seller.
- Confirm the 1.5BC case, 2 HP motor, 1750 RPM speed, TEFC enclosure, and bronze-fitted construction before ordering.

Set the pump on a suitable base, align the coupling, verify suction and discharge piping, and confirm the motor’s electrical data before startup. Prime the system, purge air, and monitor pressure, vibration, leakage, and bearing temperature during commissioning. Purchase the Bell & Gossett e-1510 1.5BC 2 HP base-mounted HVAC pump through Mulmotor.com for authentic equipment, applicable warranty support, and pump assistance.