Move high-volume hydronic water with Bell & Gossett e-1510 1.5BC, a 1.5 HP base-mounted pump with a 1750 RPM TEFC motor. Its 2-1/2-inch suction and 1-1/2-inch discharge connections suit commercial HVAC systems and outdoor installations where a totally enclosed motor is preferable to an open enclosure. Confirm the foundation, coupling, electrical data, and pump curve before installation.

The four-pole motor uses regreasable ball bearings within the base-mounted pump arrangement. The 1.5BC case size identifies the suction and discharge layout, but the supplied data does not state voltage, phase, amp draw, flow, head, dimensions, weight, impeller size, or seal material. Select the pump from the actual operating point and provide proper coupling alignment, pipe support, and service clearance.

Key Features & Benefits

- 1.5 HP Motor: Supports commercial HVAC circulation and compatible hydronic system duties.
- 1750 RPM Speed: Provides a four-pole operating reference for steady commercial pumping.
- TEFC Enclosure: Helps protect the motor in outdoor or dusty mechanical-room environments.
- 2-1/2-Inch Suction: Accommodates the larger inlet connection specified for the 1.5BC case.
- 1-1/2-Inch Discharge: Defines the outlet size for compatible commercial piping.
- Regreasable Ball Bearings: Allow scheduled lubrication as part of planned maintenance.
- Base-Mounted Design: Requires foundation support, coupling alignment, and proper pipe strain control.

Why Choose Bell & Gossett e-1510 1.5BC

The e-1510 1.5BC is suited to commercial installations that require a 1.5 HP, 1750 RPM pump with TEFC protection and serviceable regreasable bearings.

- Build: Base-mounted construction, TEFC enclosure, 1.5BC case, and regreasable ball bearings define the pump arrangement.
- Value: A TEFC motor can suit dusty or outdoor locations, while scheduled bearing service supports planned maintenance.
- Audience: Intended for commercial HVAC contractors, facility engineers, industrial maintenance buyers, and mechanical-room installers.

Applications & Use Cases

Apply Bell & Gossett e-1510 1.5BC to outdoor HVAC units, commercial hydronic systems, and moist or dusty mechanical-room environments. The supplied data identifies 2-1/2-inch suction and 1-1/2-inch discharge connections but does not provide dimensions, unit weight, base measurements, or coupling details. Verify foundation space, lifting access, alignment, and service clearance before installation.

Warranty & Support

- Warranty Terms Require Confirmation: Verify duration, coverage, registration, exclusions, and authorized service requirements with the seller.
- Confirm the 1.5BC case size, 1.5 HP motor, 1750 RPM speed, TEFC enclosure, and bearing arrangement before ordering.

Set the pump on a suitable base, align the coupling, verify suction and discharge piping, and grease the bearings according to the service instructions. Prime the system, purge air, and monitor pressure, vibration, leakage, and bearing temperature during commissioning. Purchase the Bell & Gossett e-1510 1.5BC 1.5 HP base-mounted HVAC pump through Mulmotor.com for authentic equipment, applicable warranty support, and pump assistance.