Support institutional potable-water circulation with Bell & Gossett BE9027S Series e-90 bronze inline pump for single-phase DHW systems. Its 3/4 HP motor accepts 115 or 208–230 volts, while the supplied 1.25AAB configuration identifies a 1-1/4-inch flanged arrangement. The 4-5/8-inch bronze impeller and 175 psi working pressure provide selection references. Confirm the model and curve before installation.

The Be9027S uses an all-bronze e-90 arrangement with a single-phase motor and 1-1/4-inch flanged connection. Its supplied application covers high-efficiency potable boosting and institutional water systems. Flow, head, RPM, seal materials, dimensions, weight, and temperature are not stated, so verify the complete pump data against the manufacturer’s current documentation.

Key Features & Benefits

- 3/4 HP Motor: Supports institutional potable-water boosting and DHW circulation.
- Single-Phase Voltage: Accepts 115 or 208–230-volt service after field verification.
- 1-1/4-Inch AAB Flange: Helps match the pump to existing water-system piping.
- All-Bronze Construction: Provides the supplied material for potable-water review.
- 4-5/8-Inch Bronze Impeller: Provides a defined hydraulic component for selection.
- 175 PSI Working Pressure: Establishes the supplied limit for connected system components.
- Series e-90 Design: Targets institutional potable-water circulation.

Why Choose Bell & Gossett BE9027S

The Be9027S combines single-phase electrical flexibility with an all-bronze e-90 body and 1-1/4-inch flange. It suits institutional water systems where material and connection compatibility must be verified.

- Build: Bronze construction and the 1.25AAB arrangement define the supplied assembly.
- Value: Matching the flange and voltage can reduce replacement modifications.
- Audience: Fits plumbing contractors, hospital engineers, facility managers, and commercial DHW operators.

Applications & Use Cases

Use this pump in high-efficiency potable boosting and institutional water systems that match the supplied 1-1/4-inch configuration. Check water chemistry, flange dimensions, gasket fit, valve clearance, pipe alignment, and electrical service. Flow, head, dimensions, weight, pressure, and temperature are not supplied.

Warranty & Support

- Warranty Terms: A model-specific warranty period for Be9027S requires confirmation from the authorized seller.
- Coverage Review: Confirm potable-water coverage, seal exclusions, service requirements, and claim procedures before purchase.
- Model Verification: Match Bell & Gossett BE9027S and SKU 179336LF to the seller’s order documentation.

Verify voltage, isolate the water line, align the flange, inspect the impeller and seal, purge air, and check for leaks during startup. Purchase the Bell & Gossett BE9027S Series e-90 bronze inline pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.