Bell & Gossett 1EF142LF e602S Series e-60 Pump 1/3 HP

Compact boiler loops use Bell & Gossett 1EF142LF e602S for single-phase closed-loop hydronic heating and secondary zoning. Its 1/3 HP motor accepts 115 or 208 to 230 V, while the 1 x 1 x 5.25 pump configuration and 4.50-inch bronze-trimmed impeller suit small primary loops. Confirm the flange arrangement, system curve, motor voltage, and flooded suction before startup.

The Series e-60 High Efficiency e602S uses a cast iron lead-free body with a 1-inch flanged connection. Its bronze-trimmed impeller supports the specified hydraulic design, while verified data does not include GPM, maximum head, amp draw, RPM, seal material, operating temperature, dimensions beyond the pump designation, weight, thermal protection, or self-priming capability. Match the circulator to the boiler-loop duty point before installation.

Key Features of Bell & Gossett 1EF142LF Series e-60 e602S

- 1/3 HP motor supports small boiler primary loops and secondary hydronic zoning.
- 115 or 208 to 230 V single-phase operation suits compatible heating circuits.
- 1 x 1 x 5.25 configuration supports compact commercial hydronic piping layouts.
- 1-inch flanged connection accommodates compatible small-loop heating installations.
- 4.50-inch bronze-trimmed impeller supports the specified e602S hydraulic configuration.
- Cast iron lead-free body supports compatible closed-loop hydronic heating service.
- Series e-60 high-efficiency design suits primary boiler circulation applications.
- Flow, head, amperage, RPM, seal, temperature, weight, protection, and warranty require confirmation.

Why Choose Bell & Gossett 1EF142LF Series e-60 e602S

This Bell & Gossett boiler circulator combines compact flanged construction with flexible single-phase voltage for small heating systems.

- Build: Cast iron lead-free construction and bronze impeller design support compatible closed-loop hydronic applications.
- Value: Compact configuration and flexible voltage can simplify small boiler-loop replacement planning.
- Audience: Boiler contractors, residential HVAC technicians, hydronic installers, facility maintenance teams, and heating engineers can specify this model.

Applications & Use Cases

Use the Bell & Gossett 1EF142LF Series e-60 e602S for small boiler primary loops, closed-loop hydronic heating, secondary zoning, and compact commercial HVAC. The 1 x 1 x 5.25 designation supports layout planning, while unit weight and port reach were not supplied, so verify flange spacing, valve clearance, motor access, wiring position, and service room before installation.

Warranty & Support

- Warranty: Bell & Gossett Series e-60 standard models carry a 3-Year Workmanship Warranty, subject to manufacturer terms.
- Verify voltage, purge trapped air, inspect the seal area, confirm flange alignment, and check system flow during commissioning.

Flush system debris, monitor the cast iron body for leakage, and inspect the impeller and flange during scheduled service. Purchase the Bell & Gossett 1EF142LF Series e-60 e602S hydronic circulator from Mulmotor.com for authentic equipment, applicable factory warranty protection, and pump support.