Bell & Gossett 1EF046LF e607T Series e-60 Pump 1/3 HP

Keep small commercial heating loops moving with Bell & Gossett 1EF046LF e607T, a 1/3 HP Series e-60 pump using three-phase 208–230/460 V power. Its 1-1/2-inch flanged configuration and 4.375-inch bronze impeller suit closed-loop heating where the electrical service and piping already match the equipment. Confirm the system curve, phase rotation, flange spacing, and available motor clearance before installation.

The motor drives the bronze impeller inside a 1.5 x 1.5 x 5.25 Series e-60 assembly. The supplied listing identifies a cast-iron body and lead-free configuration, but it does not state flow, head, pressure, amp draw, seal material, dimensions, or weight. Verify the current submittal, motor nameplate, connection details, and system resistance before startup.

Key Features & Benefits

- 1/3 HP Motor: Supports small commercial heating and closed-loop circulation.
- Three-Phase Operation: Accepts 208–230/460 V service for compatible commercial installations.
- 1-1/2-Inch Flanged Size: Helps contractors compare the pump with existing HVAC piping.
- 4.375-Inch Bronze Impeller: Provides a clear rotating-component reference for replacement matching.
- Cast-Iron Body: Provides the specified casing material for closed-loop hydronic service.
- Series e-60 Design: Fits small commercial heating systems where the operating point is verified.
- Lead-Free Configuration: Identifies the supplied material designation for application review.

Why Choose Bell & Gossett 1EF046LF e607T

The e607T gives commercial installers a compact three-phase circulator with a 1-1/2-inch flanged body and bronze impeller for compatible closed-loop heating systems.

- Build: Cast iron, bronze impeller, flanged pump size, and Series e-60 construction define the supplied assembly.
- Value: The identified motor and piping details help contractors compare replacement equipment before removing the existing pump.
- Audience: Suited to commercial HVAC contractors, boiler technicians, facility engineers, and small-loop heating specialists.

Applications & Use Cases

Use Bell & Gossett 1EF046LF e607T for three-phase closed loops, small commercial heating systems, boiler branches, and compatible 1-1/2-inch flanged piping. The supplied data does not list overall dimensions, unit weight, or port-to-port reach, so verify flange alignment, pipe support, phase rotation, motor access, and service clearance before installation.

Warranty & Support

- Warranty Terms Require Confirmation: Verify duration, coverage, registration, exclusions, and authorized service requirements with the seller.
- Match SKU 1EF046LF, model e607T, horsepower, voltage, phase, pump size, and impeller diameter before ordering.

Flush and fill the loop, purge trapped air, inspect flange gaskets, and verify phase rotation before startup. Check the seal area for leakage and monitor vibration, noise, and motor temperature during commissioning. Purchase the Bell & Gossett 1EF046LF e607T Series e-60 three-phase hydronic pump through Mulmotor.com for authentic equipment, applicable warranty support, and pump assistance.