Bell & Gossett 179273LF E9025S 1.25AAB Series e90 Pump

Verify the exact configuration before selecting Bell & Gossett 179273LF E9025S, a Series e-90 model listed for 1-1/4-inch flanged commercial secondary loops. The supplied listing identifies a 1/3 HP motor and 4-5/8-inch bronze impeller, but manufacturer reference data associates E9025S with different motor and impeller information. Confirm the nameplate, motor code, and current submittal before purchase.

The supplied data identifies 115 or 208–230 V single-phase power and a 1.25AAB flanged arrangement for energy-conscious HVAC circulation. Flow, head, pressure, amp draw, dimensions, weight, and seal material were not provided. Because the horsepower and impeller details require reconciliation, do not finalize the replacement from the listing title alone.

Key Features & Benefits

- 1.25AAB Pump Size: Provides a 1-1/4-inch flanged reference for commercial HVAC piping.
- Single-Phase Voltage: The supplied listing identifies 115 or 208–230 V service.
- Horsepower Verification: Helps prevent a mismatch between the supplied listing and model reference.
- Impeller Verification: Confirms the rotating geometry before curve selection.
- Series e-90 Platform: Supports commercial secondary circulation after the exact configuration is confirmed.
- Bronze Impeller: Provides the listed rotating material for compatible hydronic service.
- Model Nameplate Check: Gives contractors a required step before wiring and installation.
- 225°F Listed Temperature: Establishes the supplied operating reference for compatible heating systems.

Why Choose Bell & Gossett 179273LF E9025S

The E9025S may suit commercial 1-1/4-inch secondary loops, but the supplied horsepower and impeller information must be verified before purchasing a replacement.

- Build: 1.25AAB flanged construction, Series e-90 design, and bronze impeller are identified in the listing.
- Value: Resolving model data before purchase can prevent incorrect wiring, piping changes, and return handling.
- Audience: Suited to HVAC contractors, boiler technicians, facility engineers, and commercial pump-replacement teams.

Applications & Use Cases

Use Bell & Gossett 179273LF E9025S for commercial 1-1/4-inch secondary loops and energy-conscious HVAC circulation only after confirming the exact configuration. The supplied data does not provide dimensions, unit weight, or port reach, so verify flange spacing, valve clearance, motor access, suction conditions, and system curve before installation.

Warranty & Support

- Warranty Terms Require Confirmation: Verify duration, coverage, registration, exclusions, and authorized service requirements with the seller.
- Request written confirmation of SKU 179273LF, model E9025S, horsepower, impeller diameter, voltage, phase, and pump size.

Do not energize the pump until the motor and impeller details are confirmed. Fill and purge the loop, inspect flange gaskets, and monitor vibration, leakage, temperature, and operating pressure during commissioning. Purchase the Bell & Gossett 179273LF E9025S Series e-90 commercial hydronic pump through Mulmotor.com for authentic equipment, applicable warranty support, and model-verification assistance.