Bell & Gossett 179262LF E9013S 2AAB Series e90 Pump

High-head heating zones use Bell & Gossett 179262LF E9013S for secondary heating and cooling through 2-inch hydronic piping. Its 3/4 HP single-phase motor accepts 115 or 208 to 230 V, while the 6-1/4-inch bronze impeller and stainless steel shaft sleeve support the specified high-head configuration. Confirm the system curve, flange alignment, shaft protection, and motor voltage before startup.

The Series e-90 E9013S uses a 2AAB flanged pump size with a bronze high-head impeller and stainless steel shaft sleeve. Its close-coupled in-line configuration supports secondary zones, while verified data does not include GPM, maximum head, amp draw, RPM, seal material, operating temperature, dimensions, weight, thermal protection, or self-priming capability. Match the pump to the selected heating or cooling duty point before installation.

Key Features of Bell & Gossett 179262LF Series e-90 E9013S

- 3/4 HP motor supports high-head secondary heating and cooling zones.
- 115 or 208 to 230 V single-phase operation suits compatible hydronic circuits.
- 2AAB pump size supports 2-inch flanged heating and cooling piping.
- 6-1/4-inch bronze impeller supports the specified high-head hydraulic configuration.
- Stainless steel shaft sleeve helps protect the rotating shaft interface.
- Close-coupled in-line design supports compact secondary-zone installation.
- Series e-90 configuration suits high-head commercial hydronic circulation.
- Flow, head, amperage, RPM, seal, temperature, dimensions, weight, protection, and warranty require confirmation.

Why Choose Bell & Gossett 179262LF Series e-90 E9013S

This Bell & Gossett high-head circulator combines bronze hydraulics with stainless shaft protection for secondary zones.

- Build: Bronze impeller, stainless steel sleeve, and close-coupled construction support compatible hydronic systems.
- Value: High-head configuration can support longer secondary circuits when the pump curve and piping design match.
- Audience: Commercial HVAC contractors, heating technicians, hydronic engineers, boiler installers, and facility maintenance teams can specify this model.

Applications & Use Cases

Use the Bell & Gossett 179262LF Series e-90 E9013S for high-head hydronics, secondary heating zones, cooling circuits, and commercial HVAC systems. Physical dimensions, unit weight, and connection reach were not supplied, so verify 2-inch flange spacing, valve clearance, motor access, shaft-sleeve service, wiring position, and lifting room before installation.

Warranty & Support

- Warranty: Bell & Gossett general product terms provide one year from installation or 18 months from product date code, whichever occurs first.
- Verify voltage, purge trapped air, inspect the bronze impeller and seal, confirm shaft protection, and check flange alignment during commissioning.

Flush system debris, monitor the pump body for leakage, and inspect the shaft sleeve and flanges during scheduled service. Purchase the Bell & Gossett 179262LF Series e-90 E9013S high-head hydronic pump from Mulmotor.com for authentic equipment, applicable factory warranty protection, and pump support.