Prevent torque converter shudder and shift flare using the Acura TL 2007-2008 automatic transmission 5-speed BDGA remanufactured unit on front-wheel-drive sport sedans. Hard acceleration on VTEC engines wears out third-gear clutch frictions and causes converter clutch slippage that triggers P0741 trouble codes. This remanufactured BDGA transaxle features updated valve body separator plates, Sonnax pressure regulator valve kits, and high-energy clutch discs that hold engine torque without slipping between gear changes.

Each remanufactured unit receives a balanced torque converter with fresh carbon friction material and an updated stator bearing. Technicians inspect the aluminum differential housing and intermediate shaft bearings to prevent front axle seal leaks and highway bearing howl. The internal secondary filter and external cartridge filter are replaced with brand-new units, while shift solenoids are flow-tested on computerized benches to verify smooth gear changes under full throttle.

Key Rebuild Specifications of Acura BDGA (2007-2008)

- Sonnax Pressure Regulator Valve Kit: Prevents fluid pressure leakdown to maintain positive clutch clamping force under load.
- High-Energy Carbon Friction Discs: Resists oil glazing and friction material degradation during rapid sport-shift cycles.
- Balanced Remanufactured Torque Converter: New damper springs and internal lockup clutch stop highway cruising vibration.
- Updated Separator Plates and Gaskets: Heavy-duty valve body gaskets prevent internal cross-leaks between oil circuits.
- Computerized Shift Solenoid Calibration: Verifies linear solenoid electrical resistance and flow rates across hot fluid ranges.
- New Differential Carrier Bearings: Eliminates axle shaft play to protect final drive gears and prevent axle seal oil leaks.
- Precision Micro-Polished Sealing Hubs: Extends front pump seal lifespan by removing shaft burrs and micro-scratches.
- Comprehensive Load Dyno Testing: Checks stall speed, line pressure rise, and gear ratio transitions across all five forward gears.

Shop Productivity & Hydraulic Valve Body Upgrades

This drop-in remanufactured transmission gives automotive technicians reliable installation results with verified hydraulic integrity.

- Sonnax valve sleeve upgrades eliminate common hydraulic pressure drops, preventing harsh second-to-first gear downshift thuds.
- Pre-tested shift and lockup solenoids reduce post-installation diagnostic troubleshooting and check engine light comebacks.
- A balanced torque converter protects the front transmission pump bushing from rotational vibration damage.

Engine Matching & Bellhousing Clearance

Designed for 2007 to 2008 Acura TL 3.2-liter models, this front-wheel-drive transmission aligns with factory engine blocks and clears steering rack subframes.

Factory Warranty Coverage & Fluid Requirements

- Independent repair shops and vehicle owners receive 3-Year or 100,000-mile parts warranty coverage against manufacturing defects.
- Warranty coverage requires return of an identical BDGA core assembly with original torque converter and wiring bracketry.

Flush the radiator oil cooler circuit with approved flushing equipment, replace the external screw-on transmission filter, and fill with Honda ATF-DW1 fluid. Perform a diagnostic idle relearn and clear transmission adaptives before test driving. Order the Acura TL 2007-2008 automatic transmission 5-speed BDGA remanufactured unit from Mulmotor.com for guaranteed factory-fresh units, complete manufacturer warranty coverage, and dedicated commercial equipment support.